LED Shift Lights Installation & Setup Guide

Thank you for your purchase! Below are the installation and setup instructions for your steering wheel’s LED shift lights. This process is straightforward, but if you have any questions, feel free to reach out.

Installation Instructions:

1. Power Connection

• Locate a stable 12V power source in your vehicle using a multimeter, or refer to others who have done this job on the same car model.
• Ensure the 12V source is NOT the horn wire or airbag wire, as tapping into these could cause malfunctions.
• Ensure the 12V source completely turns off when the car is off to prevent battery drain.
• Tap the red wire into this 12V power source.
• Ground the black wire securely.

2. OBD Module Setup (Wireless Connection)

• Simply plug the OBD module into your vehicle’s OBD port.
• The module connects automatically via Bluetooth.
• Make sure this is the only OBD device plugged in.

3. Settings & Customization

• Once everything is powered and connected, hold the right-side button on the steering wheel to enter the settings menu.
• From here, you can customize parameters such as RPM shift points.

Final Notes:

This installation is very straightforward—don’t overthink it! If everything is connected properly, the shift lights will function as intended.

If you run into any issues or have any questions, feel free to contact us—we’re happy to help!